P0006: Fuel Shutoff Valve “A” Control Circuit Low
Code Definition
P0006 is defined as Fuel Shutoff Valve “A” Control Circuit Low. This is a generic code applicable across OBD-II compliant vehicles (verified source: obd-codes.com, verified 2026-11-15).
The code indicates that the ECM has detected a voltage level below the expected operating range on the control circuit for fuel shutoff valve “A.” The fuel shutoff valve is an electronically controlled component that regulates fuel flow to the engine.
Definition Scope
This is a generic code. While the basic definition applies across OBD-II vehicles, the specific location, function, and diagnostic procedures for the fuel shutoff valve vary by manufacturer, model year, and engine type. Vehicle-specific service manuals must be consulted for accurate diagnosis and repair procedures.
What This Code Does and Does Not Indicate
P0006 is a diagnostic indicator only. Detection of this code means:
- The ECM has identified a low voltage condition on the fuel shutoff valve “A” control circuit
- Further diagnosis is required to identify the underlying cause
This code does not:
- Confirm that the fuel shutoff valve has failed
- Identify the specific cause (wiring, connector, control module, or valve)
- Mandate replacement of any component
Diagnosis and Next Steps
Proper diagnosis of P0006 requires:
- Consultation of the vehicle manufacturer’s service manual for model-specific circuit diagrams and specifications
- Voltage and resistance testing of the fuel shutoff valve control circuit
- Visual inspection of wiring, connectors, and related components
- Verification that the code is reproducible
Do not assume a component has failed based on this code alone. Work with the appropriate service manual and diagnostic procedures for your specific vehicle.
Definition scope: generic
Source: https://www.obd-codes.com/p00-codes
Frequently Asked Questions
What does P0006 mean?
P0006 is a generic OBD-II code indicating the engine control module has detected a low voltage condition on the fuel shutoff valve A control circuit. It is a diagnostic indicator that requires further testing to identify the root cause.
Is P0006 the same across all vehicles?
P0006 is a generic code with the same basic definition across OBD-II compliant vehicles. However, the specific location, function, and diagnostic procedures for the fuel shutoff valve vary by manufacturer and model. Always consult your vehicle's service manual for accurate diagnosis.
Does P0006 mean the fuel shutoff valve is bad?
No. P0006 indicates a low voltage condition on the control circuit, but does not confirm that the valve itself has failed. The cause could be a wiring issue, connector problem, or control module fault. Proper diagnosis is required before replacing any component.