P0022: Camshaft Position Timing Over-Retarded Bank 2

Quick Answer

P0022 is a generic powertrain code indicating the engine control module (ECM) detected that the “A” camshaft position on Bank 2 is retarded (delayed) beyond the manufacturer’s expected timing window. This is a generic diagnostic trouble code applicable across multiple vehicle manufacturers and model years.

Code Definition

P0022: “A” Camshaft Position – Timing Over-Retarded (Bank 2)

Definition Scope: Generic (applies across manufacturers)

Bank 2 refers to the side of the engine opposite the number-one cylinder. The “A” camshaft typically designates the intake camshaft on engines equipped with dual overhead camshaft (DOHC) or variable camshaft timing (VCT) systems.

What This Code Means

When P0022 sets, the ECM has detected that the actual camshaft timing position lags behind the commanded position by more than the manufacturer’s tolerance. Over-retarded timing means the camshaft is positioned later in its cycle than expected, which can affect valve overlap, combustion efficiency, and engine performance.

Diagnosis and Testing

Proper diagnosis of P0022 requires the vehicle-specific service manual for your exact make, model, and year. Testing procedures, operating conditions (key-on, engine-running, etc.), and acceptable voltage or timing thresholds are manufacturer-specific and cannot be generalized across all vehicles.

Consult your vehicle’s service manual for:

  • Camshaft position sensor specifications and test procedures
  • Variable camshaft timing actuator operation and diagnostics
  • Wiring and connector integrity checks
  • Camshaft timing verification steps
  • Manufacturer-specific diagnostic flow charts

Important Notes

This code definition alone does not identify a failed component or mandate any specific repair. Diagnosis requires manufacturer-specific testing, and repair procedures vary significantly by vehicle make, model, and year. Do not assume causes or perform repairs based on the code definition alone.

Frequently Asked Questions

What does 'Bank 2' mean?

Bank 2 is the side of the engine that does not contain cylinder number one. On V-configuration engines, it is typically the passenger side (though this can vary by manufacturer).

Is P0022 the same across all vehicle manufacturers?

P0022 is a generic OBD-II code with a standardized definition, but diagnostic procedures, acceptable timing ranges, and repair methods are manufacturer and model-specific. Always consult your vehicle's service manual.

Can I drive with P0022 set?

Driving capability depends on the severity and the specific vehicle system. Some vehicles may operate with reduced performance; others may enter a limp mode. Consult your service manual and have the code diagnosed promptly.

Does P0022 mean the camshaft is broken?

No. The code indicates a timing position fault detected by the ECM. The actual cause may involve the camshaft, timing actuator, sensor, wiring, or control logic—diagnosis is required to determine the root cause.

Definition scope: generic

Source: https://www.obd-codes.com/p00-codes

More posts