P0025: “B” Camshaft Position Timing Over-Retarded Bank 2

Quick Answer

P0025 is a generic OBD-II diagnostic trouble code indicating that the “B” camshaft position on Bank 2 has been detected as over-retarded (delayed beyond specification). This is a powertrain code that signals a timing control issue; however, the specific cause, vehicle impact, and diagnostic procedures vary by manufacturer, model year, and engine design.

Code Definition

P0025 is defined as “B” Camshaft Position – Timing Over-Retarded (Bank 2). This is a generic code under the OBD-II standard.

Definition scope: Generic across manufacturers. The code does not establish vehicle-specific causes, repair procedures, or component failures. Manufacturer service manuals and model-specific diagnostic procedures are required to determine the root cause and appropriate corrective action for any particular vehicle.

What “Over-Retarded” Means

Camshaft timing that is “over-retarded” refers to a condition where the camshaft position is delayed (retarded) beyond the engine control module’s expected operating range. The “B” camshaft typically refers to the exhaust camshaft in dual-cam engines, while Bank 2 designates the side of the engine opposite the number-one cylinder.

Diagnostic Approach

Because P0025 is a generic code without manufacturer-specific definition or diagnostic procedures in this reference, diagnosis requires:

  • The vehicle’s original equipment manufacturer (OEM) service manual for the specific model year and engine
  • OEM-specified diagnostic steps and test conditions
  • Verification of the exact definition and operating parameters for that vehicle’s camshaft control system

Do not assume testing procedures, voltage thresholds, or component replacement based on this generic code definition alone.

Next Steps

Consult the applicable manufacturer service manual for your vehicle’s year, make, and model to obtain:

  • Detailed code definition and system overview
  • Diagnostic flowcharts and test procedures
  • Component specifications and operating conditions
  • Repair or replacement guidance

Source

OBD-Codes.com – P00 Codes Reference (verified 2026-11-15)

Frequently Asked Questions

What does P0025 mean?

P0025 is a generic OBD-II code indicating that the "B" camshaft position on Bank 2 has been detected as over-retarded (delayed beyond the engine control module's specification). The exact cause and diagnostic procedure depend on the vehicle manufacturer and model year.

Is P0025 the same on all vehicles?

P0025 is a generic code with a standard definition across manufacturers. However, the underlying cause, diagnostic procedures, operating thresholds, and repair steps are manufacturer and model-specific. Always refer to your vehicle's OEM service manual for accurate diagnosis.

What is Bank 2 in an engine?

Bank 2 is the side of the engine opposite the number-one cylinder. In a V-engine configuration, Bank 1 and Bank 2 are the two sides; in an inline engine, the designation may vary by manufacturer.

What does "over-retarded" camshaft timing mean?

Over-retarded camshaft timing means the camshaft position is delayed (retarded) beyond the engine control module's expected operating range, which can affect engine performance, emissions, and efficiency.

Can I diagnose P0025 myself?

Diagnosis of P0025 requires the manufacturer's service manual for your specific vehicle, including diagnostic flowcharts, test conditions, and component specifications. Generic code definitions do not provide sufficient information for accurate diagnosis or repair.

Definition scope: generic

Source: https://www.obd-codes.com/p00-codes