Quick Answer
P0029 is a generic powertrain code indicating the engine control module detected a range or performance problem in the exhaust valve control solenoid circuit on Bank 2 (the side of the engine opposite the primary cylinder). This is a diagnostic trouble code only; it does not identify a failed component or mandate any specific repair.
Code Definition
P0029 is defined as Exhaust Valve Control Solenoid Circuit Range/Performance Bank 2. This is a generic OBD-II code applicable across vehicle manufacturers.
The code indicates the powertrain control module (PCM) detected an electrical or operational issue with the exhaust valve control solenoid circuit serving Bank 2 of the engine. “Range/Performance” means the circuit voltage, current, or response fell outside the expected operating parameters, or the solenoid did not respond as commanded.
Definition Scope
This is a generic code definition established by the OBD-II standard. It does not specify:
- Which manufacturer or vehicle model is affected
- The exact electrical threshold that triggered the code
- Whether the fault is in the solenoid, wiring, connector, or control circuit
- The specific diagnostic or repair procedure
Diagnosis and repair procedures vary significantly by manufacturer, model year, and engine type. Always consult the vehicle’s service manual for the exact testing conditions, voltage specifications, and repair steps.
Next Steps
When P0029 is present:
- Retrieve the complete diagnostic trouble code history and freeze frame data using a diagnostic scanner
- Note whether the code is current or historical
- Consult the vehicle manufacturer’s service manual for Bank 2 identification, solenoid location, circuit diagram, and diagnostic procedures
- Follow the manufacturer’s specified testing sequence; do not assume a component has failed based on the code alone
A generic code does not establish the root cause or confirm a part failure. Professional diagnosis using the correct service manual is required.
Frequently Asked Questions
What does P0029 mean?
P0029 is a generic OBD-II code indicating the engine control module detected a range or performance problem in the exhaust valve control solenoid circuit on Bank 2. It does not identify a specific failed component.
Is P0029 the same across all vehicles?
P0029 is a generic code definition, but the actual circuit, solenoid design, electrical thresholds, and diagnostic procedures differ by manufacturer and model. Always consult the vehicle's service manual for accurate diagnosis.
Does P0029 mean the solenoid is bad?
No. The code indicates a circuit range or performance issue. The fault could be in the solenoid, wiring, connectors, or control circuit. Professional diagnosis using the service manual is required to identify the root cause.
What should I do if P0029 appears?
Retrieve the full diagnostic trouble code history and freeze frame data. Consult the vehicle manufacturer's service manual for Bank 2 solenoid location, circuit diagram, and step-by-step diagnostic procedures. Do not attempt repairs without the correct manual.
Definition scope: generic