Quick Answer
P0035 is a generic powertrain diagnostic trouble code indicating a high voltage or signal condition in the turbocharger bypass valve control circuit. This code does not identify a specific failed component or prescribe a repair action without manufacturer-specific diagnostic procedures.
Code Definition
P0035 is defined as Turbo Charger Bypass Valve Control Circuit High. This is a generic code, meaning the definition applies across manufacturers, though the underlying cause and diagnostic approach vary by vehicle make, model, year, and engine configuration.
What This Code Means
The powertrain control module (PCM) has detected a voltage or signal level in the turbocharger bypass valve control circuit that exceeds the expected operating range. The bypass valve (also called a wastegate valve or blow-off valve) is part of the turbocharger system and helps regulate boost pressure by diverting exhaust gas away from the turbine when needed.
A “high” circuit condition typically indicates:
- Higher-than-expected voltage or signal amplitude on the control circuit
- A potential open circuit, short to power, or control signal malfunction
- A fault in the solenoid driver, wiring, or control module output
Diagnostic Scope
Because P0035 is a generic code, it does not establish vehicle-specific causes, wiring diagrams, voltage thresholds, or test procedures. Diagnosis and repair require the applicable manufacturer service manual for your vehicle’s make, model, year, and engine type. Only the manufacturer’s documented procedures can determine whether the fault lies in the control solenoid, wiring harness, connectors, PCM output stage, or related components.
What to Do
If this code appears on your vehicle:
- Consult the manufacturer service manual for your specific vehicle to obtain the correct diagnostic flowchart and test procedures.
- Do not assume a component has failed based on the code alone; proper diagnosis is required.
- Have the fault code read and cleared only after diagnosis is complete and any necessary repairs are made.
Source
Code definition verified from obd-codes.com.
Frequently Asked Questions
Is P0035 a serious code?
The severity depends on your vehicle's operating condition and the underlying cause. Some vehicles may operate with reduced performance or boost control until the fault is diagnosed. Consult your manufacturer service manual or a qualified technician for guidance specific to your vehicle.
Can I drive with P0035 active?
This depends on your vehicle's design and the specific fault. Some vehicles may enter a limp mode or reduce turbocharger boost. Do not assume it is safe to drive; refer to your owner's manual or have the vehicle diagnosed by a qualified technician.
What is a turbocharger bypass valve?
The bypass valve (wastegate or blow-off valve) is part of the turbocharger system. It diverts exhaust gas away from the turbine to regulate boost pressure and prevent overboosting. The PCM controls this valve via an electrical solenoid or actuator.
Does P0035 mean the turbo is broken?
No. P0035 indicates a control circuit fault, not necessarily a failed turbocharger. The fault may be in the control solenoid, wiring, connectors, or PCM output. Proper diagnosis is required to identify the actual cause.
How is P0035 diagnosed?
Diagnosis requires the manufacturer service manual for your vehicle. The manual provides the specific diagnostic flowchart, voltage thresholds, test conditions, and procedures to identify whether the fault is in the solenoid, wiring, connectors, or control module.
Definition scope: generic