P0055: HO2S Heater Resistance (Bank 1, Sensor 3)
Code Definition
P0055 is defined as HO2S Heater Resistance (Bank 1, Sensor 3). This is a generic powertrain code applicable across vehicle makes and model years that support OBD-II diagnostics.
Definition Scope: Generic. This code definition does not establish manufacturer-specific operating thresholds, wiring configurations, or diagnostic procedures. Vehicle-specific testing requirements and acceptable resistance ranges must be obtained from the applicable manufacturer service manual.
What This Code Addresses
The code pertains to the heater circuit of the oxygen sensor (HO2S) positioned as Bank 1, Sensor 3 in the exhaust system. Oxygen sensors require heating elements to reach optimal operating temperature quickly, enabling accurate emissions monitoring. The heater circuit resistance is monitored by the powertrain control module (PCM) to detect electrical faults.
Diagnosis and Testing
A P0055 code indicates the PCM detected an abnormal resistance condition in the heater circuit. This does not confirm whether the sensor heater element, wiring, connector, or control circuit is at fault.
Do not perform voltage or resistance testing without consulting the vehicle manufacturer’s service manual. Testing procedures, acceptable resistance ranges, key-on/engine-running conditions, and connector pinout information are manufacturer and model-specific and must be verified in the official service documentation for your vehicle.
Consult the applicable manufacturer service manual for:
- Exact sensor location and identification
- Heater circuit wiring diagram and connector information
- Specified resistance ranges and test conditions
- Step-by-step diagnostic procedures
- Proper connector and circuit testing methods
Important Diagnostic Notes
This code definition alone does not establish:
- Whether the oxygen sensor, wiring, or control circuit has failed
- Manufacturer-specific resistance thresholds or operating conditions
- Recommended repair procedures or parts replacement
- Whether the vehicle is safe to operate
Proper diagnosis requires manufacturer service manual procedures specific to your vehicle’s year, make, and model.
References
Code definition sourced from OBD-II generic diagnostic standards.
Frequently Asked Questions
What does P0055 mean?
P0055 is a generic OBD-II code indicating a resistance problem detected in the heater circuit of the oxygen sensor on Bank 1, Sensor 3. The code does not identify which component in the heater circuit has failed.
Is P0055 a generic or manufacturer-specific code?
P0055 is a generic OBD-II code applicable across vehicle makes and models. However, testing procedures, resistance thresholds, and repair methods are manufacturer-specific and must be obtained from the vehicle's service manual.
Can I test the oxygen sensor heater myself?
Testing the heater circuit requires knowledge of the manufacturer's wiring diagram, acceptable resistance ranges, and proper test conditions. Consult your vehicle's service manual before attempting any testing. Incorrect testing procedures can damage the sensor or control circuit.
Does P0055 mean the oxygen sensor must be replaced?
No. P0055 indicates a heater circuit resistance fault but does not confirm the sensor is defective. The fault could be in the sensor heater element, wiring, connector, or control circuit. Diagnosis is required to identify the actual cause.
What is Bank 1, Sensor 3?
Bank 1 refers to the side of the engine containing cylinder number 1. Sensor 3 indicates the oxygen sensor's position in the exhaust system. The exact location varies by vehicle; consult your service manual for sensor location.
Definition scope: generic