P0073 Ambient Air Temperature Sensor Circuit High Input

Quick Answer

P0073 is a generic OBD-II diagnostic trouble code that indicates the ambient air temperature sensor circuit is detecting a high input signal. This code does not specify the root cause, vehicle make, model, or year, and does not mandate component replacement.

Code Definition

P0073 is defined as Ambient Air Temperature Sensor Circuit High Input. This is a generic powertrain code applicable across different vehicle manufacturers.

Definition Scope: Generic. The code definition alone does not establish vehicle-specific causes, diagnostic procedures, or repair requirements. Manufacturer-specific service manuals are required to determine the exact diagnostic approach for your vehicle.

What This Code Means

The ambient air temperature (AAT) sensor measures outside air temperature and reports this data to the engine control module (ECM). When the ECM detects that the sensor circuit voltage or signal is abnormally high compared to expected operating parameters, it sets code P0073.

A high input signal may indicate:

  • An electrical circuit condition affecting sensor signal voltage
  • A sensor response outside normal operating range
  • A wiring or connector issue in the sensor circuit

The presence of this code does not confirm a specific component failure or prescribe a repair action.

Diagnosis and Next Steps

Accurate diagnosis requires consulting the applicable manufacturer service manual for your vehicle’s make, model, and year. The manual will provide:

  • Exact sensor circuit specifications and voltage thresholds
  • Diagnostic test procedures and key-on/engine-running conditions
  • Wiring diagrams and connector pinouts
  • Sensor location and access information
  • Manufacturer-specific diagnostic protocols

Do not perform electrical testing, wiring inspection, or component replacement without guidance from the vehicle manufacturer’s documented service procedures.

Related Codes

Other ambient air temperature sensor circuit codes include:

  • P0072 – Ambient Air Temperature Sensor Circuit Low Input
  • P0074 – Ambient Air Temperature Sensor Circuit Intermittent

Frequently Asked Questions

What does P0073 mean?

P0073 is a generic OBD-II code indicating the ambient air temperature sensor circuit is reading a high input signal. It does not specify the cause or vehicle type.

Is P0073 the same for all vehicles?

P0073 is a generic code definition, but diagnostic procedures, sensor specifications, and repair steps vary by manufacturer, model, and year. Consult your vehicle's service manual for accurate diagnosis.

Does P0073 mean the sensor is bad?

No. The code indicates a high signal condition in the sensor circuit. The actual cause could be a sensor issue, wiring problem, connector fault, or other circuit condition. Diagnosis is required to determine the root cause.

Can I drive with P0073?

Driving safety depends on the underlying cause and your vehicle's operation. Consult your vehicle's service manual or a qualified technician before operating the vehicle.

Where is the ambient air temperature sensor located?

Sensor location varies by vehicle make and model. Refer to your manufacturer's service manual for the specific location on your vehicle.

Definition scope: generic

Source: https://www.obd-codes.com/p00-codes