P0066 Air Assisted Injector Control Circuit Low

Quick Answer

P0066 is a generic OBD-II diagnostic trouble code that indicates a voltage condition in the air assisted injector control circuit. The code signals either a circuit malfunction or abnormally low voltage detection by the powertrain control module (PCM).

Code Definition

According to OBD-II standards, P0066 is defined as Air Assisted Injector Control Circuit or Circuit Low. This is a generic code, meaning the definition and detection logic apply across manufacturers, though implementation and specific thresholds vary by vehicle make, model, and year.

Definition Scope

P0066 is classified as a generic powertrain code. Generic codes do not establish vehicle-specific causes, component locations, or repair procedures. Vehicles equipped with air assisted fuel injection systems may trigger this code when the PCM detects an electrical fault in the control circuit supplying the air assisted injector solenoid or control valve.

What This Code Means

The PCM monitors the control circuit voltage for the air assisted injector system. When voltage falls below the manufacturer’s specified threshold or when an open circuit, short to ground, or other electrical fault is detected, the code is set. The exact voltage threshold and detection method are defined in the vehicle’s service manual and vary by manufacturer.

Next Steps

Diagnosis of P0066 requires access to the vehicle’s service manual for the specific make, model, and year. The manual contains:

  • Exact circuit voltage specifications and operating thresholds
  • Wiring diagrams and component locations
  • Manufacturer-specific diagnostic procedures
  • Key-on and key-off voltage test points
  • Pinout information for connectors and control modules

Professional diagnosis should follow the applicable manufacturer service manual to confirm the fault location and determine the appropriate repair.

Frequently Asked Questions

What does P0066 mean?

P0066 is a generic OBD-II code indicating an Air Assisted Injector Control Circuit or Circuit Low condition. It signals that the PCM has detected abnormally low voltage or a circuit fault in the air assisted injector control system.

Is P0066 a generic or manufacturer-specific code?

P0066 is a generic code defined by OBD-II standards. However, the specific voltage thresholds, circuit design, and diagnostic procedures are manufacturer-specific and must be verified in the vehicle's service manual.

Can I diagnose P0066 without a service manual?

No. Proper diagnosis requires the manufacturer's service manual for your specific vehicle, which contains circuit voltage specifications, wiring diagrams, test procedures, and component locations. Generic information alone cannot confirm the fault location or appropriate repair.

Does P0066 mean a part must be replaced?

No. A code alone does not prove a component has failed. The code indicates a voltage condition or circuit fault that requires professional diagnosis to identify the root cause, which may be a wiring issue, connector problem, control module fault, or component failure.

Definition scope: generic

Source: https://www.obd-codes.com/p00-codes